Legal Notices

You are licensed to download and copy documentation, software, and other materials from this website provided you agree to the following terms and conditions: You may use the materials for informational, non-commercial purposes only. You may not alter or modify the materials in any way. You may not use any graphics separate from any accompanying text. You may distribute copies of the documentation available at this website only to customers and potential customers of Flynn Systems products. However, you may not charge them for such use. Any other distribution to third parties is prohibited unless you obtain the prior written consent of Flynn Systems. You may use any software provided on this website provided that you agree to be bound by the terms and conditions of Flynn Systems’ Program License Agreement. You may not modify, reverse engineer or disassemble the software. You may not use the materials in any way that may be adverse to Flynn Systems’ interests. All copies of materials that you download or copy from this website must include a copy of this Legal Notice. Failure to comply with these terms and conditions will terminate the license.

This site may contain links to other web sites operated by third parties. You acknowledge that Flynn Systems neither endorses nor is affiliated with the linked site and is not responsible for any content that appears on the linked site. You also acknowledge that the owner of the linked site neither endorses nor is affiliated with Flynn Systems. The Digital Millennium Copyright Act of 1998 provides recourse for copyright owners who believe that material appearing on the Internet infringes their rights under U.S. copyright law. If you believe in good faith that materials hosted by Flynn Systems infringe your copyright, you (or your agent) may send us a notice requesting that the material be removed, or access to it blocked. The notice must include the following information: (a) a physical or electronic signature of a person authorized to act on behalf of the owner of an exclusive right that is allegedly infringed; (b) identification of the copyrighted work claimed to have been infringed (or if multiple copyrighted works located on the site are covered by a single notification, a representative list of such works); (c) identification of the material that is claimed to be infringing or the subject of infringing activity, and information reasonably sufficient to allow Flynn Systems to locate the material on the Site; (d) the name, address, telephone number, and email address (if available) of the complaining party; (e) a statement that the complaining party has a good faith belief that use of the material in the manner complained of is not authorized by the copyright owner, its agent, or the law; and (f) a statement that the information in the notification is accurate, and under penalty of perjury, that the complaining party is authorized to act on behalf of the owner of an exclusive right that is allegedly infringed. If you believe in good faith that a notice of copyright infringement has been wrongly filed against you, the DMCA permits you to send Flynn Systems a counter-notice. Notices and counter-notices must meet the then-current statutory requirements imposed by the DMCA; see http://www.loc.gov/copyright for details. Notices and counter-notices with respect to the Site should be sent to Flynn Systems Corporation, 74 Northeastern Blvd, Nashua, NH, 03062 USA. We suggest that you consult your legal advisor before filing a notice or counter-notice. Also, be aware that there can be penalties for false claims under the DMCA.

Flynn Systems, FS-ATG, ScanGuard, onTAP and other names of Flynn Systems products, product features, and services are trademarks and/or service marks of Flynn Systems Corporation. Flynn Systems has the following trademarks registered in the United States Patent and Trademark Office (USPTO): onTAP® Other product and company names mentioned on this web site may be the trademarks of their respective owners. Nothing contained in this Legal Notice shall be construed as conferring by implication, estoppel, or any other legal theory, a license or right to any patent, trademark, copyright, or other intellectual property right, except those expressly provided herein. The products, processes, software, and other technology described at this website may be the subject of other intellectual property rights owned by Flynn Systems or by third parties, and no licenses are granted herein.

THE DOCUMENTATION PROVIDED AT THIS SITE IS “AS IS” WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT OF INTELLECTUAL PROPERTY, OR FITNESS FOR ANY PARTICULAR PURPOSE. IN NO EVENT SHALL FLYNN SYSTEMS OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO USE THE DOCUMENTATION PROVIDED ON THIS SITE, EVEN IF FLYNN SYSTEMS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME JURISDICTIONS PROHIBIT THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SOME OF THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. Flynn Systems further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within this website. Flynn Systems may make changes to these materials, or to the products described therein, at any time without notice. Flynn Systems makes no commitment to update this documentation.

The materials and documentation are provided with “RESTRICTED RIGHTS”. Use, duplication, or disclosure by the Government is subject to restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or its successor. Use of the documentation and materials by the Government constitutes acknowledgment of Flynn Systems’ proprietary rights in them.

The License granted hereby to Customer is a personal non-transferable, non exclusive license to use the FS-ATG Software (Software) only on the specifically designated Computer and only for the designated period. The Software, including all documentation and materials, may not be sublicensed, published, released or transferred to any other party by Customer without prior written consent of Flynn Systems Corporation (FSC).

 Customer acknowledges that FSC has an exclusive proprietary right and interest in the Software, and that any information, including but not limited to documents, object code, source code, test materials or the like, relating in any way to the Software is FSC’s confidential Trade Secret information. Customer therefore agrees to use the Software only as provided in this Agreement and only during the term of this License. Customer agrees not to use the Software on any computer other than the designated Computer. Customer further agrees to protect all written materials, object code, source code, and other information relating to the Software in any form from disclosure by its agents, employees, or customers to any person other than Customer of Customer’s employees who need to know. Customer acknowledges FSC’s copyright in the Software and understands that unauthorized reproduction or transfer of the Software or of associated documentation may be a criminal act as well as a violation of this Agreement. COPYING: Software furnished by FSC in machine-readable form may be copied by Customer, ONLY for use with the designated Computer and ONLY for backup purposes. The original and all copies thereof shall remain the sole and exclusive property of FSC. Customer agrees to include FSC’s copyright notice on all copies, including partial copies, in any form, including machine readable form.

Customer may not assign rights or obligations of this License, in whole or in part, without prior written consent of FSC. This Software License Agreement constitutes the entire agreement and understanding between the parties and supersedes all prior understandings and agreements, oral or written, including any conflicting terms of conditions of Customer’s purchase order, and shall not be amended on changed except by written agreement. This Agreement shall be governed by and interpreted and enforced in accordance with the Laws of the State of New Hampshire. BY YOUR INSTALLING onTAP SOFTWARE ON YOUR COMPUTER, YOU ACKNOWLEDGE THAT YOU HAVE READ AND UNDERSTAND THE FOREGOING TERMS, AND AGREE TO BE BOUND THEREBY. IF YOU DO NOT AGREE TO BE SO BOUND, YOU SHALL PROMPTLY DELETE THE SOFTWARE FROM YOUR COMPUTER.